Home
AstrOptix Orin Carrier BoardAstrOptix Orin Super Carrier BoardOrin Nano Carrier BoardOrin Nano Lite Carrier BoardGoogle Coral Base Board
FCB-ER9500FCB-ER8530FCB-EV9520LFCB-EV9500LFCB-EW9500HFCB-EV9500MKT&C ATC-HZ5540T-LPTamron MP3010M-EV
LVDS – MIPI BridgeLVDS – MIPI Bridge for i.MX 8M PlusAGX Orin MIPI CSI-2 Bridge (LVDS, HDMI, GMSL, MIPI)AGX Orin MIPI CSI-2 Bridge (LVDS, HDMI, 2 × MIPI)AGX Orin Quad MIPI CSI-2 Bridge (4 × MIPI)LVDS – GMSL3 SerializerGMSL3 – MIPI DeserializerHDMI – MIPI BridgePAL/NTSC – MIPI BridgePAL/NTSC – MIPI Pico Bridge
HDMI InterfacePAL InterfaceUSB Interface
Touch Screen ControlKeypad ControlRemote Control
NVIDIANXPRockchipQualcommTexas InstrumentsRenesasRaspberry PiTurnkey Drivers
Wireless 4K CameraWired 4K Camera
O-MoteO-RouterMQTT Software
Wireless Video & TelemetryPower Distribution ModuleCube Power Module
3.3V Single Apex Dev Kit3.3V Quad Apex Dev kit
Customized AI SolutionBSP & Camera DriverOn-Premise CloudCustom Design
Artificial IntelligenceInternet of Things
DocsBlogGalleryContact Us

Camera Connection

This section covers the physical LVDS camera and MIPI camera connection on the AstrOptix Orin Super Carrier Board. Version 2 does have a separate MIPI CSI-2 camera connector — the LVDS input is the primary camera path, with other cameras supported separately through an optional bridge module via the 22-pin MIPI CSI-2 connector.

LVDS Camera Connection

Connect the LVDS camera to J13 (LVDS, bottom side) using a Kel cable.

Board Connector (J13)

J13 LVDS connector on AstrOptix AI Carrier Board

Connected Setup

LVDS camera connected to AstrOptix AI Carrier Board

Warning

Ensure the cable is fully seated and correctly oriented before powering on. Incorrect installation may permanently damage the camera.

MIPI Camera Connection

Connect the camera to J9 (MIPI, top side) with the help of optional bridge module via 22-pin MIPI CSI-2 connector.

Board Connector (J9)

Picture to be uploaded

Connected Setup

Picture to be uploaded