Home
Orin Nano/NX Carrier Board V1Orin Nano/NX Carrier Board V2Orin Nano Carrier BoardOrin Nano Lite Carrier BoardGoogle Coral Base Board
FCB-ER9500FCB-ER8530FCB-EV9520LFCB-EV9500LFCB-EW9500HFCB-EV9500MKT&C ATC-HZ5540T-LPTamron MP3010M-EV
LVDS – MIPI BridgeAGX Orin MIPI CSI-2 BridgeHDMI – MIPI BridgePAL/NTSC – MIPI Bridge
HDMI InterfacePAL InterfaceUSB Interface
Touch Screen ControlKeypad ControlRemote Control
NVIDIANXPRockchipQualcommTexas InstrumentsRenesasRaspberry PiTurnkey Drivers
Wireless 4K CameraWired 4K Camera
O-MoteO-RouterMQTT Software
Wireless Video & TelemetryPower Distribution ModuleCube Power Module
3.3V Single Apex Dev Kit3.3V Quad Apex Dev kit
AI SolutionBSP & Camera DriverOn-Premise CloudCustom Design
Artificial IntelligenceInternet of Things
DocsBlogGalleryContact Us

LVDS – USB 3.0 Interface Board

Overview

The LVDS – USB 3.0 Interface Board (P/No: FC-OOR-LM) is a compact camera interface bridge that converts the LVDS video output of Sony, Tamron, KT&C, and Videology LVDS block cameras into a SuperSpeed USB 3.0 stream over a single Type-C connection.

The board is UVC 1.1 compliant, so Windows and Linux hosts enumerate the camera as a standard USB video-class device — no proprietary drivers, no kernel patches, and no device-tree work. Camera control travels over the same cable: VISCA commands are carried over USB CDC (a virtual COM port) or through a dedicated 3.3 V TTL UART header, selectable by an onboard DIP switch.

Key Features
  • Converts Sony/Tamron FCB's LVDS video signals to USB 3.0 for SuperSpeed video transfer
  • USB 3.0 SuperSpeed (5 Gbps) Type-C interface
  • Supports Full HD 1080p @ 60 fps (UVC 1.1)
  • Compatible with Sony FCB-EV9500L / EV9520L LVDS cameras
  • VISCA camera control via USB CDC or UART TTL
  • Plug-and-play operation on Windows / Linux
  • DIP switch selectable camera control (USB / TTL)
  • Regulated 12 V DC input
  • LED indicators for Power & Status
  • Compact (50 × 60 mm), RoHS compliant
  • Industrial operating range −40 °C to +85 °C
Product Description

The LVDS – USB3 Interface Board is a compact and high-performance interface solution designed to bridge Sony FCB-EV series LVDS cameras (such as FCB-EV9500L and FCB-EV9520L) to any standard USB 3.0 host. It enables real-time Full HD (1080p60) video streaming with simultaneous camera control, all through a single USB Type-C connection.

Built around a SuperSpeed USB 3.0 architecture, the board supports UVC 1.1 compliant video output for instant plug-and-play operation with Windows and Linux systems — no proprietary drivers required. Camera configuration and control are seamlessly managed through the VISCA protocol, available either over USB CDC (virtual COM port) or via a dedicated TTL serial interface, allowing flexible system integration.

Powered by a regulated 12 V DC input, the interface board also supplies power to the connected camera module, minimizing external cabling and simplifying installation. LED indicators provide at-a-glance system and power status, while on-board DIP switches allow quick selection of control mode (USB or UART).

Designed for industrial-grade reliability, the Oppila LVDS–USB3 Interface Board features a rugged layout, compact footprint (50 × 60 mm), and an extended operating temperature range from −40 °C to +85 °C. Its combination of high performance, small form factor, and versatile connectivity makes it ideal for UAV payloads, defence optics, surveillance platforms, and machine-vision systems requiring stable, high-speed imaging over USB 3.0.

In This Guide
SectionsDescription
HardwareTechnical specifications, board views, mechanical data, and connector details
SoftwareGetting started, UVC video streaming, and VISCA camera control on Windows and Linux
SupportTroubleshooting and support for the LVDS – USB 3.0 Interface Board
Release NotesVersion history and changelog for the LVDS – USB 3.0 Interface Board