Home
AstrOptix Orin Carrier BoardAstrOptix Orin Super Carrier BoardOrin Nano Carrier BoardOrin Nano Lite Carrier BoardGoogle Coral Base Board
FCB-ER9500FCB-ER8530FCB-EV9520LFCB-EV9500LFCB-EW9500HFCB-EV9500MKT&C ATC-HZ5540T-LPTamron MP3010M-EV
LVDS – MIPI BridgeLVDS – MIPI Bridge for i.MX 8M PlusAGX Orin MIPI CSI-2 Bridge (LVDS, HDMI, GMSL, MIPI)AGX Orin MIPI CSI-2 Bridge (LVDS, HDMI, 2 × MIPI)AGX Orin Quad MIPI CSI-2 Bridge (4 × MIPI)LVDS – GMSL3 SerializerGMSL3 – MIPI DeserializerHDMI – MIPI BridgePAL/NTSC – MIPI BridgePAL/NTSC – MIPI Pico Bridge
HDMI InterfacePAL InterfaceUSB Interface
Touch Screen ControlKeypad ControlRemote Control
NVIDIANXPRockchipQualcommTexas InstrumentsRenesasRaspberry PiTurnkey Drivers
Wireless 4K CameraWired 4K Camera
O-MoteO-RouterMQTT Software
Wireless Video & TelemetryPower Distribution ModuleCube Power Module
3.3V Single Apex Dev Kit3.3V Quad Apex Dev kit
Customized AI SolutionBSP & Camera DriverOn-Premise CloudCustom Design
Artificial IntelligenceInternet of Things
DocsBlogGalleryContact Us

PAL/NTSC Camera Integration with Jetson Orin

System Block Diagram

System Block Diagram

Hardware Setup

Supported Cameras

Any PAL or NTSC analog camera with a composite (CVBS) video output.

Integration Steps

1
Camera → Bridge board

Connect your analog PAL/NTSC composite (CVBS) camera to one of the input connectors on the bridge board: J3 or J4 (MCX), or J5 (4-pin Molex, which also supplies 12 V to the camera).

2
Bridge board → Jetson CSI Port

Connect the J1 MIPI CSI-2 connector of the bridge board to the Jetson carrier board CSI Port [CAM1] using the 15 to 22-pin FPC cable.

3
Power Supply

Provide a regulated 12 V DC supply to the J2 connector of the bridge board.

Note

Up to three cameras can be connected at once. The host selects which input is converted to MIPI CSI-2 over I²C.