Home
Orin Nano/NX Carrier BoardXavier NX Carrier BoardJetson Nano Carrier BoardGoogle Coral Base Board
FCB-ER9500FCB-ER8530FCB-EV9520LFCB-EV9500LFCB-EW9500HFCB-EV9500M
LVDS – MIPIHDMI – MIPIPAL – MIPIMIPI – Adaptor
HDMI InterfacePAL InterfaceUSB Interface
Touch Screen ControlKeypad ControlRemote Control
NVIDIANXPRockchipQualcommTexas InstrumentsRenesasRaspberry PiTurnkey Drivers
Wireless 4K CameraWired 4K Camera
O-MoteO-RouterMQTT Software
Wireless Video & TelemetryPower Distribution ModuleCube Power Module
3.3V Single Apex Dev Kit3.3V Quad Apex Dev kitFPAA Trainer – Real GNA
AI SolutionBSP & Camera DriverOn-Premise CloudCustom Design
Artificial IntelligenceInternet of Things
DocsBlogGallery
Contact UsGlobal Network

Raspberry Pi 5 Video Streaming

This section describes how to execute the video streaming script and verify that the integration is working correctly.

Video Streaming Procedure

Step 7: Re-open Terminal After Reboot

After the system reboots, log in and open a new terminal window:

Ctrl + Alt + T

Step 8: Navigate to the Integration Directory

Change to the extracted integration directory:

cd OPPILA_RASP_TRIXIE_64_INTEGRATION/

Step 9: Start the Video Stream

Run the video streaming script using the following command:

sh video_stream.sh

After running the command, the video stream will start and the video output will be displayed.

Verification

Follow these checks to verify the setup was successful:

Confirm Video Output

  • The video stream window should open and display live video from the LVDS-MIPI CSI-2 Bridge Board.
  • If no video appears, verify the cable connections, ensure the correct power sequence was followed or check the Troubleshooting guide.