Home
Orin Nano/NX Carrier BoardXavier NX Carrier BoardJetson Nano Carrier BoardGoogle Coral Base Board
FCB-ER9500FCB-ER8530FCB-EV9520LFCB-EV9500LFCB-EW9500HFCB-EV9500M
LVDS – MIPIHDMI – MIPIPAL – MIPIMIPI – Adaptor
HDMI InterfacePAL InterfaceUSB Interface
Touch Screen ControlKeypad ControlRemote Control
NVIDIANXPRockchipQualcommTexas InstrumentsRenesasRaspberry PiTurnkey Drivers
Wireless 4K CameraWired 4K Camera
O-MoteO-RouterMQTT Software
Wireless Video & TelemetryPower Distribution ModuleCube Power Module
3.3V Single Apex Dev Kit3.3V Quad Apex Dev kitFPAA Trainer – Real GNA
AI SolutionBSP & Camera DriverOn-Premise CloudCustom Design
Artificial IntelligenceInternet of Things
DocsBlogGallery
Contact UsGlobal Network

Raspberry Pi 5 Troubleshooting

This section provides solutions for common issues encountered during setup and summarizes important operational guidelines.

Troubleshooting

Video Not Displaying After Stream Command

  • Confirm the correct serial number was used in the setup script.
  • Re-run the setup script with the correct serial number and reboot again.

Setup Script Fails to Run

  • Ensure the script has execute permission:
sudo chmod +x run_setup.sh
  • Verify you are inside the RASP_INTEGRATION/ directory before running the script.
  • Confirm sudo access is available on your user account.

SD Card Not Detected by Imager

  • Try a different USB port or SD card adapter on the host computer.
  • Use the lsblk command to verify the SD card is visible:
lsblk
  • Ensure the SD card is not write-protected.

Network Not Connected

  • Verify Wi-Fi credentials were entered correctly during OEM setup.
  • Reconnect to Wi-Fi via the system network settings.
  • Confirm the network is active before running the setup script.

Check System Logs for Driver Errors

If the driver fails to initialize or the camera is not detected, check the system kernel log using the following command:

sudo dmesg | grep -i lvdsmipi

Review the terminal output for initialization status or driver error codes.

Additional Notes
  • OS Image Compatibility: Always ensure the correct 64-bit Trixie (Debian 13) image is used. Other image versions may not be compatible with the RASP_INTEGRATION package.
  • Serial Number Specificity: The serial number in the setup command is device-specific and must exactly match the LVDS-MIPI CSI-2 Bridge Board serial number.
  • Do Not Interrupt: Do not interrupt the setup script or the reboot process. Allow the system to complete each step fully.
  • Documentation: Document the date and bridge board serial number used for future reference.
  • Support: Contact Oppila Support Team if you encounter persistent issues or errors during this procedure.